Nema 17 Stepper Motor 17HM08-1204S 3.6V 0.9 deg 11Ncm 4 Wires(out of stock)
- Manuals and Documentation: Full Datasheet:
Nema 17 Stepper Motor 17HM08-1204S 3.6V 0.9 deg 11Ncm 4 Wires
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x21mm. It has 4 wires, each phase draws current 1.2.0A, with holding torque 11Ncm (15.6oz.in).
Electrical Specification
- Manufacturer Part Number: 17HM08-1204S
- Motor Type: Bipolar Stepper
- Step Angle: 0.9 deg
- Holding Torque: 11Ncm(15.6oz.in)
- Rated Current/phase: 1.2A
- Voltage: 3.6V
- Phase Resistance: 3.0ohms
- Inductance : 2.2mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 21mm
- Shaft Diameter: Φ5mm
- Shaft Length: 17mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight : 150g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 11 |
Holding Torque (oz.in) | 15.6 |
Inductance(mH) | 3 |
Phase Resistance(ohm) | 3 |
Rated Current (A) | 1.2 |
Step Angle(°) | 0.9 |
Physical Specification | |
Body Length(mm) | 21 |
Frame Size(mm) | 42x42 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | O |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 17 |
No. of Lead | 4 |
Lead Length(mm) | 300 |
Weight(g) | 150 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.