Open Loop Stepper Motor

Step Angle(°)
0.9
1.2
1.8
Bipolar/Unipolar
Bipolar
Bipolar/Unipolar
Unipolar
Holding Torque (Ncm) -
Holding Torque (oz.in) -
Inductance(mH) -
Phase Resistance(ohm) -
Rated Current (A) -
Shaft Type
D-Cut
Key-Way
Keyway
O
Single Shaft/Dual Shaft
Dual Shaft
Single Shaft
Shaft Diameter(mm)
2.5
4
5
6
6.35
8
9
10
12.7
14
19
No. of Lead
3
4
5
6
8
This Nema 34 cnc stepper motor with size 86x86x114mm. It has 4 wires, each phase draws 5.0A, with holding torque 8.5Nm (1204oz.in). A rear shaft can mount encoder, hand wheel or equals.
Buy It Now: £89.09
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x56mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.26Nm (178.4oz.in).
Buy It Now: £16.49
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x25mm. It has 4 wires, each phase draws current 0.7A, with holding torque 18Ncm (25.5oz.in).
Buy It Now: £8.40
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws current 2.0A, with holding torque 46Ncm (65.1oz.in).
Buy It Now: £14.43
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's good i
Buy It Now: £53.27
High torque Low noise, Nema 17 stepper motor with step angle 1.8deg, Holding Torque: 45Ncm(63.74oz.in), 12-24VDC, Rated Current/phase: 1.50A & Phase Resistance: 2.3ohms, Build with 1m Pin Connector.
Buy It Now: £8.41
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws current 0.4A at 12V, with holding torque 26Ncm (36.8oz.in).
Buy It Now: £7.78
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's good i
Buy It Now: £11.87
This is the strongest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2.1A, with holding torque up to 65Ncm (92oz.in).
Buy It Now: £15.45
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.9Nm (269oz.in).
Buy It Now: £23.38
This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40mm, It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 2.0A, with holding torque 45Ncm (64oz.in).
Buy It Now: £10.25
This is the shortest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws current 1.0A, with holding torque 13Ncm (18.4oz.in).
Buy It Now: £9.27
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 3A, with holding torque 1.9Nm (269oz.in).
Buy It Now: £23.38
This is the strongest Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x114mm. It has 4 wires, each phase draws 4.2A, with holding torque 3.0Nm (425oz.in).
Buy It Now: £31.34
This nema 23 stepper motor with step angle 1.8deg and size 57x57x84mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's houlding torque reach 2.0Nm(283oz.in) w
Buy It Now: £25.77