Nema 17 Stepper Motor 17HS15-1504S-X1 45Ncm 12V 1.5A 4 Wires with 1m Cable and Connector
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th, 2026
Nema 17 Stepper Motor 17HS15-1504S-X1 45Ncm 12V 1.5A 4 Wires with 1m Cable and Connector
High torque Low noise
Nema 17 stepper motor with step angle 1.8deg
Holding Torque: 45Ncm(63.74oz.in), 12-24VDC
Rated Current/phase: 1.50A & Phase Resistance: 2.3ohms
Build with 1m Pin Connector








| Electrical Specification | |
|---|---|
| Bipolar/Unipolar | Bipolar |
| Holding Torque (Ncm) | 45 |
| Holding Torque (oz.in) | 63.74 |
| Inductance(mH) | 4.4 |
| Phase Resistance(ohm) | 2.3 |
| Rated Current (A) | 1.5 |
| Physical Specification | |
| Body Length(mm) | 39 |
| Lead Length(mm) | 1000 |
| No. of Lead | 4 |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| Shaft Type | D-Cut |
| Single Shaft/Dual Shaft | Single Shaft |
| Weight(g) | 280 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.


クレジットカード決済
PayPal