Nema 8 Stepper Motor 8HS12-0506S 5.75V 1.8 deg 1.8Ncm 6 Wires(out of stock)
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th, 2026
Nema 8 Stepper Motor 8HS12-0506S 5.75V 1.8 deg 1.8Ncm 6 Wires
This unipolar nema 8 stepper motor with step angle 1.8deg and size 20x20x30mm. It has 6 wires, each phase draws 0.5A, with holding torque 1.8Ncm (2.55oz.in).
Electrical Specification
- Manufacturer Part Number: 8HS12-0506S
- Motor Type: Unipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 1.8Ncm(2.55oz.in)
- Rated Current/phase: 0.5A
- Voltage: 5.75V
- Phase Resistance: 11.5ohms
- Inductance: 1.7mH ± 20%(1KHz)
Physical Specification
- Frame Size: 20 x 20mm
- Body Length: 30mm
- Shaft Shape : D-cut
- Shaft Diameter: Φ4mm
- Shaft Length: 10mm
- D-cut Length : 7mm
- Number of Leads: 6
- Lead Length: 300mm
- Weight: 80g
Connection
|
A+
|
O+
|
A-
|
B+
|
O-
|
B-
|
|
RED
|
BLK
|
YEL
|
BLU
|
ORG
|
GRN
|
| Electrical Specification | |
|---|---|
| Bipolar/Unipolar | Unipolar |
| Holding Torque (Ncm) | 1.8 |
| Holding Torque (oz.in) | 2.55 |
| Inductance(mH) | 1.7 |
| Phase Resistance(ohm) | 11.5 |
| Rated Current (A) | 0.5 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 28 |
| Frame Size(mm) | 20x20 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 4 |
| Shaft Length(mm) | 10 |
| No. of Lead | 6 |
| Lead Length(mm) | 300 |
| Weight(g) | 60 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.


クレジットカード決済
PayPal