Stepper Motor

Nema 34 Stepper Motor 34HP29-6004S 1.8deg 4.5Nm 6.0A 4 Wires: Number Of Phase: 2, Step Angle: 1.8 deg, Holding Torque: 4.5 Nm(637.38oz.in), Rated Current/phase: 6.0A, Frame Size: 86 x 86mm, Body Length: 74 mm, Shaft Diameter: Φ14mm, Shaft Length: 37mm
Buy It Now: £43.29
The motor part is 66mm body 1.8 degree 2.5A Nema 23 stepper motor, and it has integrated with a 9.53mm (0.3752") diameter 250mm (9.8425") length lead screw and a POM screw nut, the linear travel is 10.16mm (0.4") per revolution.
Buy It Now: £126.46
This is a 2-phase bipolar stepper motor with a 1.8° step angle and a static moment of 5.88Ncm (8.32 oz.in). It operates with a rated current of 0.67A per phase and a phase voltage of 3.75V. The motor features a frame size of 28x28mm, with a motor length o
Buy It Now: £32.33
This is a non-captive linear stepper motor with a 1.8° step angle and a static moment of 49N·cm (69.38 oz·in). It operates within a voltage range of 12-36V, with a phase current of 1A and phase voltage of 6.5VDC. The motor features a 42 x 42mm frame size
Buy It Now: £14.54
This is a 4-phase permanent magnet linear stepper motor with a 15° step angle and 0.23A phase current. It operates at 12VDC and features a maximum travel distance of 22mm with a step increment of 0.0417mm per step. With a Φ25mm frame size and a push force
Buy It Now: £19.40
This is a 4-phase permanent magnet stepper motor with a 7.5° step angle and 44mN.m detent torque. It features a 0.24A phase current and operates at 12V. With a compact Φ25mm frame size, 2mm diameter shaft, and unipolar excitation.
Buy It Now: £4.84
This is a 2-phase bipolar stepper motor with a 1.8° step angle and 2.5Ncm detent torque. It features a 0.5A phase current and operates with a rated voltage of 1.55V. With a Nema 11 (28mm x 28mm) frame size, 3mm diameter shaft, and 4-wire connection.
Buy It Now: £24.25
This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A at 6.0V, with holding torque 4Ncm (5.7oz.in).
Buy It Now: £18.21
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x45mm. It has 4 wires, each phase draws 0.67A at 4.6V, with holding torque 9.5Ncm (13.5oz.in).
Buy It Now: £13.20
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 1.68A, with holding torque 45Ncm (64oz.in). It's very good choice for 3D printer.
Buy It Now: £11.87
This is a 2-phase bipolar stepper motor with a 1.8° step angle and 59Ncm holding torque. It features a 2A phase current and operates within a voltage range of 12-36V. With a Nema 17 (42mm x 42mm) frame size, 5mm diameter shaft, and D-cut design, this moto
Buy It Now: £8.89
Nema 23 Integrated Closed Loop Stepper Motor ESS23-20 2.2Nm 24-50VDC 1000CPR: Holding Torque: 2.2Nm(311.60oz.in), Input Voltage: 24 - 50VDC, Output Peak Current: 1.8 - 4.0A, Logic Input Current:10mA, Logic Input Voltage:5V, Frame Size: 57 x 57mm, Body Len
Buy It Now: £101.59
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.68A, with holding torque 36Ncm (51oz.in).
Buy It Now: £10.40
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.
Buy It Now: £86.43