Oukeda PM25 Permanent Magnet Stepper Motor OK25PM15-034A5 2 Phase 1.8 Deg 1A 12Ncm
- 5% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till November 4th,2025
This is a 2-phase permanent magnet stepper motor with a 1.8° step angle and 12Ncm static torque. It features a 1A phase current and operates within a voltage range of 2-24V. With a Φ36.5mm frame size, 5mm diameter shaft, and D-cut design.
Electrical Specification:
Manufacturer Part Number:OK25PM15-034A5
Motor Type: PM Stepper Motor
Phase: 2
Step Angle: 1.8 deg
Phase Current: 1A
Phase Voltage:10VDC
Use Voltage:2-24V
Static Moment:12Ncm(16.90 oz.in)
Phase Resistance: 10± 7% ohms(25 ℃)
Inductance: 6mH ± 20%
Insulation Class:B
Physical Specification:
Frame Size: Φ36.5 mm
Body Length: 20 mm
Shaft Diameter: Φ5 mm
Shaft Length: 22 mm
D-cut Length: 17 mm
Number of Leads: 4
Lead Length: 240 mm
Weight:100g;
.jpg)

| Electrical Specification | |
|---|---|
| Holding Torque (Ncm) | 12 |
| Holding Torque (oz.in) | 16.9 |
| Inductance(mH) | 6 |
| Phase Resistance(ohm) | 10 |
| Rated Current (A) | 1 |
| Step Angle(°) | 1.8 |
| Motor Type | PM Stepper Motor |
| No. of Phase | 2 |
| Phase Current(A) | 1 |
| Physical Specification | |
| Body Length(mm) | 20 |
| Frame Size(mm) | Φ36.5 |
| Lead Length(mm) | 240 |
| No. of Lead | 4 |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 22 |
| Shaft Type | D-cut |
| Single Shaft/Dual Shaft | Single Shaft |
| Weight(g) | 100 |
| D-cut Length | 17 |


クレジットカード決済
PayPal