Oukeda PM Stepper Motor OSP001469 7.5 Deg 2.45Ncm 12V 2 Phase Φ35 mm for Printer
- 5% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till November 4th,2025
This is a 2-phase permanent magnet stepper motor with a 7.5° step angle. It operates at 12VDC with a pull-in torque of 2.45Ncm. With a Φ35mm frame size, 2mm diameter shaft, and 4-wire connection.
Electrical Specification:
Manufacturer Part Number:PM35-2402
Motor Type: PM Stepper Motor
Phase: 2
Step Angle: 7.5 deg
Phase Voltage:12VDC
Pull in Torque≥2.45Ncm(3.47 oz.in)
Phase Resistance: 40 ± 10% ohms(25 ℃)
Inductance: 17 mH ± 20%
Physical Specification:
Frame Size: Φ35 mm
Body Length:22.5 mm
Shaft Diameter: Φ2 mm
Shaft Length: 12 mm
Number of Leads:4
Lead Length: 150 mm
Weight:40g;

.jpg)
.jpg)

| Electrical Specification | |
|---|---|
| Inductance(mH) | 17 |
| Phase Resistance(ohm) | 40 |
| Step Angle(°) | 7.5 |
| Motor Type | PM Stepper Motor |
| No. of Phase | 2 |
| Phase Voltage(V) | 12 |
| Physical Specification | |
| Body Length(mm) | 22.5 |
| Frame Size(mm) | Φ35 |
| Lead Length(mm) | 120 |
| No. of Lead | 4 |
| Shaft Diameter(mm) | 2 |
| Shaft Length(mm) | 12 |
| Weight(g) | 40 |


クレジットカード決済
PayPal