E Series Nema 23 Stepper Motor 23HE30-2804S 1.8deg 1.9Nm 2.8A 3.2V 4 Wires
-
Manuals and Documentation:
Full Datasheet:
Torque Curve:
- 5% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till November 4th,2025
E Series Nema 23 Stepper Motor 23HE30-2804S 1.8deg 1.9Nm 2.8A 3.2V 4 Wires
Electrical Specification
Manufacturer Part Number: 23HE30-2804S
Number Of Phase: 2
Step Angle: 1.8 deg
Holding Torque: 1.9 Nm(269oz.in)
Rated Current/phase: 2.8 A
Phase Resistance: 1.13 ohms± 10%
Inductance: 5.4 mH ± 20%(1KHz)
Physical Specification
Frame Size: 57 x 57 mm
Body Length: 76 mm
Shaft Diameter: Φ6.35 mm
Shaft Length: 21 mm
D-CUT Shaft Length: 15 mm
Number of Leads: 4
Lead Length: 500 mm
Weight: 1.2 kg
Connection
| A+ | A- | B+ | B- |
| BLK | GRN | RED | BLU |
| Electrical Specification | |
|---|---|
| Holding Torque (Ncm) | 190 |
| Holding Torque (oz.in) | 269 |
| Inductance(mH) | 5.4 |
| Phase Resistance(ohm) | 1.13 |
| Rated Current (A) | 2.8 |
| Step Angle(deg.) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 76 |
| Frame Size(mm) | Nema 23 (57 x 57) |
| Lead Length(mm) | 500 |
| No. of Lead | 4 |
| Shaft Diameter(mm) | 6.35 |
| Shaft Length(mm) | 21 |
| Single Shaft/Dual Shaft | Single Shaft |
| Weight(g) | 1200 |
| Output Shaft Type | D-Cut |
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox


クレジットカード決済
PayPal