Nema 17 Full D-cut Shaft Stepper Motor 17HM19-2004S1 0.9deg 46Ncm 2.9V 4 Wires
- 
					Manuals and Documentation:
										Full Datasheet: 					
										
Torque Curve: 
- 5% Off On Total Order Amount!
 - Enjoy Discount at Checkout! No Need Coupon Code!
 - Valid Till November 4th,2025
 
Nema 17 Full D-cut Shaft Stepper Motor 17HM19-2004S1 0.9deg 46Ncm 2.9V 4 Wires
.jpg)
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws current 2.0A, with holding torque 46Ncm (65.1oz.in).
Electrical Specification
Manufacturer Part Number: 17HM19-2004S1
Motor Type: Bipolar Stepper
Step Angle: 0.9 deg
Holding Torque: 46Ncm(65.1oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.45ohms
Inductance: 4.0mH ± 20%(1KHz)
Physical Specification
Frame Size: 42 x 42mm
Body Length: 48mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 24mm
Number of Leads: 4
Lead Length: 500mm
Weight: 370g
Connection
| A+ | A- | B+ | B- | 
| Black | Green | Red | Blue | 
| Electrical Specification | |
|---|---|
| Bipolar/Unipolar | Bipolar | 
| Holding Torque (Ncm) | 46 | 
| Holding Torque (oz.in) | 65.1 | 
| Inductance(mH) | 3 | 
| Phase Resistance(ohm) | 1.4 | 
| Rated Current (A) | 2 | 
| Step Angle(deg.) | 0.9 | 
| Physical Specification | |
| Body Length(mm) | 48 | 
| Frame Size(mm) | Nema 17 (42 x 42) | 
| Lead Length(mm) | 500 | 
| No. of Lead | 4 | 
| Shaft Diameter(mm) | 5 | 
| Shaft Length(mm) | 24 | 
| Single Shaft/Dual Shaft | Single Shaft | 
| Weight(g) | 400 | 
| Output Shaft Type | D-Cut | 
- Motor Shaft
 - Cable
 - Connector
 - Encoder
 - Brake
 - Gearbox
 
- Motor Shaft
 - Cable
 - Connector
 - Encoder
 - Brake
 - Gearbox
 


			
        
												
クレジットカード決済
PayPal