Nema 17 Integrated Stepper Motor 0.44Nm with Controller ISC02 10-30VDC(out of stock)
- Manuals and Documentation: Full Datasheet:
Nema 17 Integrated Stepper Motor 0.44Nm with Controller ISC02 10-30VDC
Electrical Specifications:
- Manufacturer Part Number: ISC02-04
- Step Angle: 1.8 deg
- Holding Torque: 44 Ncm(62.32 oz.in)
- Rated Current/phase: 1.68 A
- Phase Resistance: 2 ohms
- Inductance: 2.5 mH ± 20%(1KHz)
Physical Specifications:
- Frame Size: 42 x 42 mm
- Body Length: 69.5 mm
- Shaft Diameter: Φ5 mm
- Shaft Length: 24 mm
- Weight: 405.5 g
Driver Specifications:
- Output Peak Current: 0 - 2 A
- Input Voltage: 10 - 30 VDC
- Speed control through external potentiometer 0. 75 - 1250 RPM
- Isolation Resistance: More than 100 MΩ
- Dielectric strength: 500VAC for 1MIN.
Connection
V+
|
GND
|
ENA
|
ON
|
H/L
|
DIR
|
Vr
|
SPD
|
Red
|
Black
|
Blue
|
White
|
Yellow
|
Green
|
Orange
|
Purple
|
Integrate Stepper Servo Motor Specification | |
---|---|
Input Voltage (V) | 10 - 30 |
Electrical Specification | |
Holding Torque (Ncm) | 44 |
Holding Torque (oz.in) | 62.32 |
Inductance(mH) | 2.5 |
Phase Resistance(ohm) | 2 |
Rated Current (A) | 1.68 |
Step Angle(°) | 1.8 |
Stepper Driver Specification | |
Output Current(A) | 0 - 2 |
Physical Specification | |
Body Length(mm) | 69.5 |
Frame Size(mm) | 42x42 |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |