Nema 23 Round Stepper Motor 23HR20-2804S 0.9 deg 70Ncm 1.8V 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 23 Round Stepper Motor 23HR20-2804S 0.9 deg 70Ncm 1.8V 4 Wires
This round bipolar Nema 23 stepper motor with step angle 0.9deg and size 57x52mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.7Nm (99.13oz.in).
Electrical Specification
- Manufacturer Part Number: 23HR20-2804S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 0.7Nm(99.13oz.in)
- Rated Current/phase: 2.8A
- Voltage: 1.8V
- Phase Resistance: 0.65ohms
- Inductance: 1.6mH ± 20%(1KHz)
Physical Specification
- Frame Size: deg57mm
- Body Length: 52mm
- Shaft Diameter: Φ6.35mm
- Shaft Length: 20.6mm
- D-cut Length: 19mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 580g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 70 |
Holding Torque (oz.in) | 99.13 |
Inductance(mH) | 1.6 |
Phase Resistance(ohm) | 0.65 |
Rated Current (A) | 2.8 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 52 |
Frame Size(mm) | 57x57 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 6.35 |
Shaft Length(mm) | 20.6 |
No. of Lead | 4 |
Lead Length(mm) | 500 |
Weight(g) | 700 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.