Nema 42 Stepper Motor Controller Kit 22.0Nm 1-DM2282-42HS59 1 Axis CNC Kit
-
Manuals and Documentation:
Motor Datasheet:
Driver Manual:
Nema 42 Stepper Motor Controller Kit 22.0Nm 1-DM2282-42HS59 1 Axis CNC Kit
This CNC kit included:
- 1 x Leadshine DM2282 Digital Stepper Motor Drive 80-220 VAC with 0.5-8.2A
- 1 x Nema 42 CNC Stepper Motor Bipolar 30Nm (4248oz.in) 8A 110x201mm 4 Wires
Motor Specification
- Manufacturer Part Number: 42HS59-6004S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 22Nm(3115oz.in)
- Rated Current/phase: 6A
- Voltage: 4.8V
- Phase Resistance: 0.8ohms
- Inductance: 14mH ± 20%(1KHz)
- Frame Size: 110 x 110mm
- Body Length: 150mm
- Shaft Diameter: Φ19mm
- Shaft Length: 55.37mm
- Key-way Length: 35mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 1.2kg
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Driver Specification
- Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movemen
- Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
- Anti-Resonance provides optimal torque and nulls mid-range instability
- Microstep resolutions programmable, from full-step to 102,400. It can also be set via DIP switches.
- Soft-start with no "jump" when powered on
- Supply voltage up to +220 VAC
- Output current programmable, from 0.5A to 8.2A. It can also be set via DIP switches.
- Maximum frequency: 200KHz
- TTL compatible and optically isolated input
- Automatic idle-current reduction (Reduction rate can be software configured)
- Suitable for 2-phase and 4-phase motors
- Support PUL/DIR and CW/CCW modes
- Over-voltage, Under-voltage, over-current, phase-error protections