Dual Shaft Nema 11 Stepper Motor 11HS12-0956D 1.8 deg 4.3Ncm 2.7V 6 Wires
- Manuals and Documentation: Full Datasheet:
Dual Shaft Nema 11 Stepper Motor 11HS12-0956D 1.8 deg 4.3Ncm 2.7V 6 Wires
This unipolar stepper motor with step angle 1.8deg and size 28x28x31.5mm. It has 6 wires, each phase draws 0.95A at 2.66V, with holding torque 4.3Ncm (6.1oz.in). A 10mm rear shaft was for encoder or equals.
Electrical Specification
- Manufacturer Part Number: 11HS12-0956D
- Motor Type: Unipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 4.3Ncm(6.1oz.in)
- Rated Current/phase: 0.95A
- Voltage: 2.66V
- Phase Resistance: 2.8ohms
- Inductance : 1mH ± 20%(1KHz)
Physical Specification
- Frame Size: 28 x 28mm
- Body Length: 31.5mm
- Shaft Diameter: Φ5mm
- Front Shaft Length: 20mm
- Rear Shaft Length : 10mm
- Number of Leads: 6
- Lead Length: 300mm
- Weight: 110g
Connection
A+
|
O+
|
A-
|
B+
|
O-
|
B-
|
RED
|
BLK
|
YEL
|
BLU
|
ORG
|
GRN
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Unipolar |
Holding Torque (Ncm) | 4.3 |
Holding Torque (oz.in) | 6.1 |
Inductance(mH) | 1 |
Phase Resistance(ohm) | 2.8 |
Rated Current (A) | 0.95 |
Step Angle(°) | 1.8 |
Motor Specification | |
Body Length(mm) | 31.5 |
Physical Specification | |
Frame Size(mm) | 28x28 |
Single Shaft/Dual Shaft | Dual Shaft |
Shaft Type | O |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 20 |
No. of Lead | 6 |
Lead Length(mm) | 300 |
Weight(g) | 110 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.