Nema 17 Stepper Motor 17HS13-1334S 2.8V 1.8 deg 22Ncm 4 Wires
- Manuals and Documentation: Full Datasheet:
Nema 17 Stepper Motor 17HS13-1334S 2.8V 1.8 deg 22Ncm 4 Wires
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 1.33A, with holding torque 22Ncm (31oz.in).
Electrical Specification
- Manufacturer Part Number: 17HS13-1334S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 22Ncm(31oz.in)
- Rated Current/phase: 1.33A
- Voltage: 2.8V
- Phase Resistance: 2.1ohms
- Inductance: 2.5mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 33mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 16.5mm
- Number of Leads: 4
- Lead Length: 400mm
- Weight: 230g
Connection
|
A+
|
A-
|
B+
|
B-
|
|
Black
|
Green
|
Red
|
Blue
|
| Electrical Specification | |
|---|---|
| Bipolar/Unipolar | Bipolar |
| Holding Torque (Ncm) | 22 |
| Holding Torque (oz.in) | 31 |
| Inductance(mH) | 2.5 |
| Phase Resistance(ohm) | 2.1 |
| Rated Current (A) | 1.33 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 34 |
| Frame Size(mm) | 42x42 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Lead | 4 |
| Lead Length(mm) | 400 |
| Weight(g) | 220 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.


クレジットカード決済
PayPal