Nema 34 Dual Shaft Stepper Motor 34HS46-5004D 8.5Nm 5V 4 Wires
-
Manuals and Documentation:
Full Datasheet:
Torque Curver:
Nema 34 Dual Shaft Stepper Motor 34HS46-5004D 8.5Nm 5V 4 Wires
This Nema 34 cnc stepper motor with size 86x86x114mm. It has 4 wires, each phase draws 5.0A, with holding torque 8.5Nm (1204oz.in). A rear shaft can mount encoder, hand wheel or equals.
Electrical Specification
- Manufacturer Part Number: 34HS46-5004D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 8.5Nm(1204oz.in)
- Rated Current/phase: 5.0A
- Voltage: 5V
- Phase Resistance: 1.0ohms
- Inductance: 11mH ± 20%(1KHz)
Physical Specification
- Frame Size: 86 x 86mm
- Body Length: 114mm
- Shaft Diameter: Φ14mm
- Front Shaft Length: 37mm
- Rear Shaft Length: 34mm
- D-cut Length: 25mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 3.6kg
Connection
A+
|
A-
|
B+
|
B-
|
Red
|
Green
|
Yellow
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 850 |
Holding Torque (oz.in) | 1204 |
Inductance(mH) | 11 |
Phase Resistance(ohm) | 1 |
Rated Current (A) | 5 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 114 |
Frame Size(mm) | 86x86 |
Single Shaft/Dual Shaft | Dual Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 14 |
Shaft Length(mm) | 37 |
No. of Lead | 4 |
Lead Length(mm) | 300 |
Weight(g) | 3600 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.