Motors & Drivers
Max Load: 1200N (269.9 lbs); Speed: 3mm/s. IP68 Protection: Dustproof and waterproof, can be used in up to 1.5 meters of water for over 30 minutes. Aircraft-Grade Aluminum: Corrosion and wear-resistant. Stroke Length:Travel range: 50mm to 1000mm.
Buy It Now:
£77.88
MCAC806 is designed and manufactured using DSP vector control, closed loop servo drives with all-digital AC. It includes three adjustable feedback loop control which are position loop, speed loop and current loop. Suitable for driving voltages between 48V and 80V, and the power below 400W AC servo motor.
Buy It Now:
£223.95
1.5KW DC Servo Motor Kit 130ASM1500-2500C+MCAC8A0 48V 4.78Nm 37A 3000RPM with MCAC8A0 Servo Driver
Buy It Now:
£295.10
200W DC Servo Motor Kit 60ASM200-5-1024C+MCAC610 0.64N.m 36V 7.5A 0.64N.m 3000 RPM with MCAC610 Servo Driver
Buy It Now:
£152.81
These stepper motors are a unit consisting of stepper motor, encoder and driver, making the system inexpensive and very compact. The position evaluation is done by an optical encoder with 1000 lines, as soon as a position deviation appears, it is immediately compensated by the electronics: Step losses do not occur.
Buy It Now:
£71.14
iHSV60-30-20-36 Integrated AC Servo Driving Motor is integrated AC servo drive into servo motor, adopts vector control in DSP chip, features in full closed loop, all digital, low heat, small vibration, and high response, as well as includes three adjustable feedback loop control modes(postition loop, speed loop, and current loop).
Buy It Now:
£133.39
This is a 2-phase stepper motor with a 1.8° step angle and a rated torque of 1.8Ncm (2.55 oz.in). It operates with a rated voltage of 3.9VDC and a rated current of 0.6A. The motor features a frame size of 20x20mm and a body length of 30mm. The shaft has a
Buy It Now:
£16.16
This is a 3-phase brushless DC motor (BLDC) with a rated voltage of 24VDC and a rated speed of 3000±10% RPM. It offers a rated torque of 22Ncm (31.15 oz.in) and operates with a rated current of 4A, providing a rated power of 69W. The motor features a fram
Buy It Now:
£28.29
This is a 2-phase bipolar stepper motor with a 1.8° step angle and a holding torque of 6N·cm (8.49 oz·in). It operates within a voltage range of 12-24V and features a rated current of 1A per phase. With a frame size of 28 x 28mm and an 8mm shaft diameter,
Buy It Now:
£59.01
This is a 3-phase brushless DC motor with a rated voltage of 24V and a rated speed of 4200±10% RPM. It delivers a rated torque of 0.32N·m (45.31 oz·in) and has a maximum rated current of 6.3A. With a no-load speed of 3000±10% RPM and a rated power of 100W
Buy It Now:
£32.33
This controller features an ARM high-speed chip and supports various speed regulation methods, including frequency, analog, and manual speed control (via built-in or external potentiometer). It provides protection against overcurrent, overvoltage, undervo
Buy It Now:
£60.63
This brushless DC driver features a DSP-based computing core and multiple control modes. The fully digital design allows for flexible input control methods and comprehensive software and hardware protection functions. The driver can be connected to a computer via the RS-485 communication interface for parameter adjustment, including settings for protection parameters, motor parameters, and acceleration and deceleration times.
Buy It Now:
£68.72
This is a 2-phase stepper motor with a 1.8° step angle and 44Ncm holding torque, designed for use with integrated controller systems. It has a rated current of 1.68A per phase and operates within a voltage range of 12-40VDC. With a Nema 17 (42mm x 42mm) f
Buy It Now:
£25.86
This is a 2-phase bipolar closed-loop stepper motor with a 1.8° step angle and 2.0 Nm holding torque. It features a 2.8A phase current and is compatible with a voltage range of 20-48VDC. With a Nema 23 (57mmx57mm) frame size and an 8mm diameter shaft, it
Buy It Now:
£56.59
WS55-220 is a 3 phase BLDC motor controller. Voltage range is from 20VDC to 50VDC. The controller can drive the DLDC motor with HALL or without HALL. External potentiometer control/external voltage control.
Buy It Now:
£38.62
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x26mm. It has 4 wires, each phase draws 0.4A at 12V, with holding torque 14Ncm (20oz.in).
Buy It Now:
£10.01