Motors & Drivers
Buy It Now:
£270.72
3.0KW AC Servo Motor Kit 130JASM530220K-17B-SC+JASD30002-20B 220V 14.32N.m 2000RPM 13.6A with JASD20002-20B Servo Driver
Buy It Now:
£645.99
2.0KW AC Servo Motor Kit 130JASM520220K-17B-SC+JASD20002-20B 220V 9.55N.m 2000RPM 10.2A with JASD20002-20B Servo Driver
Buy It Now:
£559.48
2.0KW AC Servo Motor Kit 130JASM520220K-17B+JASD20002-20B 9.55N.m 220V 2000RPM 10.2A with JASD20002-20B Servo Driver
Buy It Now:
£472.97
IHSV57-30-10-36 Integrated AC Servo Driving Motor is integrated AC servo drive into servo motor, adopts vector control in DSP chip, features in full closed loop, all digital, low heat, small vibration, and high response, as well as includes three adjustable feedback loop control modes(postition loop, speed loop, and current loop).
Buy It Now:
£74.37
Buy It Now:
£220.14
This Nema 17 stepper motor with 38mm body and 1.68A rated current, integrated a planetary gearbox of 5.18:1 gear ratio.
Buy It Now:
£26.71
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x20mm. It has 4 wires, each phase draws 0.4A, with holding torque 5Ncm (7.08oz.in).
Buy It Now:
£10.01
1.5KW AC Servo Motor Kit 130JASM515220K-17B-SC+JASD20002-20B 7.16N.m 220V 2000RPM 7.2A with Servo Driver + Brake
Buy It Now:
£532.80
1.5KW AC Servo Motor Kit 130JASM515220K-17B+JASD20002-20B 7.16N.m 220V 2000RPM 7.2A with JASD20002 Servo Driver
Buy It Now:
£443.87
The JMC NEMA 34 IHSS86-80-100 integrated closed-loop stepper motor features a compact design for efficient space usage and provides high positioning accuracy without step loss. It utilizes variable current control for efficient operation and smooth, even at low speeds. The motor includes built-in acceleration and deceleration control for improved smoothness during starts and stops.
Buy It Now:
£126.12
Buy It Now:
£54.97
This is a 2-phase permanent magnet stepper motor with a 7.5° step angle. It operates at 12VDC with a pull-in torque of 2.45Ncm. With a Φ35mm frame size, 2mm diameter shaft, and 4-wire connection.
Buy It Now:
£4.03
This model is economy linear stepper motor which named Nema 23 external linear actuator, the motor part is 56mm 1.8 degree 3A Nema 23 stepper motor. It was integrated with 150mm Tr8x8 threaded rod, and a Brass screw nut move along the threaded rod.
Buy It Now:
£40.82
This dual shaft nema 8 stepper motors with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A at 6.0V, with holding torque 4Ncm (5.7oz.in). A rear shaft is available.
Buy It Now:
£18.81
Nema 34 Stepper Motor 34HP29-6004S 1.8deg 4.5Nm 6.0A 4 Wires: Number Of Phase: 2, Step Angle: 1.8 deg, Holding Torque: 4.5 Nm(637.38oz.in), Rated Current/phase: 6.0A, Frame Size: 86 x 86mm, Body Length: 74 mm, Shaft Diameter: Φ14mm, Shaft Length: 37mm
Buy It Now:
£43.29