Motors & Drivers
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.68A, with holding torque 36Ncm (51oz.in).
Buy It Now:
£10.40
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 10:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Buy It Now:
£42.86
AR3 Open Source Robot Stepper Motors Package Kit, This kit only has motors in AR3 as the below.
Buy It Now:
£305.26
Difference between AR3 and AR2 is that each motor in AR3 have rear shaft and mounting holes for encoder.
Buy It Now:
£504.66
AR2 Open Source Robot Package Kit with Stepper Motor, Driver, Power Supply and Bracket
Buy It Now:
£477.17
Variable Frequency Drive (VFD) V70-7.5T4 Spindle Motor Inverter 7.5KW 10HP 17.5A 380V: Input Voltage: 380 V (Three-phase), Capacity of driver: 14 KVA, Applicable motor: 7.5KW, Control mode: V/F, Vector control, Communication control: RS-485
Buy It Now:
£232.15
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.
Buy It Now:
£86.43
DMRS Series are stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications. DMRS Series also support the feature of teaching, the operation modes of Profile Position, Profile Velocity and Homing.
Buy It Now:
£68.18
CLRS Series are closed loop stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can save additional controllers in most of point-to-point applications.
Buy It Now:
£119.28
CLRS Series are closed loop stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can save additional controllers in most of point-to-point applications.
Buy It Now:
£85.22
CL42T is a closed loop stepper driver designed to solve the loss of step problem in open loop stepper control systems. The CL42T can power 2-phase NEMA11, 14 and 17 stepper motors with incremental encoders(Encoder resolution must be 1000-line). Compared with traditional open loop stepper systems, a CL42T adopted closed loop step system can eliminate potential loss of step, make real-time position error correction, and do not need torque reservation (100% torque implementation).
Buy It Now:
£51.16
This mini nema 11 bipolar stepper motor with step angle 1.8deg and size 28x28x31mm. It has 4 wires, each phase draws 0.67A at 3.8V, with holding torque 6Ncm (8.5oz.in).
Buy It Now:
£12.37
Buy It Now:
£5.93
Buy It Now:
£14.08
Nema 11 Dual Shaft Geared Stepper Motor with 14:1 Planetary Gearbox (9.5mm Rear Shaft Length): Motor Type: Bipolar Stepper, Step Angle: 1.8 deg, Holding Torque without Gearbox: 0.14 Ncm(19.88 oz.in), Rated Current/phase: 0.67 A, Phase Resistance: 12 ohms.
Buy It Now:
£34.31