Motors & Drivers
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34mm. It has 4 wires, each phase draws 0.8A at 5.4V, with holding torque 18Ncm (25.5oz.in).
Buy It Now:
£10.40
This Nema 14 stepper motor with 33mm body and 0.8A rated current, integrated a planetary gearbox of 50.9:1 gear ratio.
Buy It Now:
£31.48
This Nema 14 stepper motor with 52mm body and 1.5A rated current, integrated a planetary gearbox of 3.71:1 gear ratio.
Buy It Now:
£35.20
Nema 14 Closed Loop Stepper Motor 14HS20-1504D-E22-300 40Ncm Encoder 300CPR: Motor Type: Bipolar Stepper, Step Angle: 1.8 deg, Holding Torque: 0.40Nm(56.66oz.in), Rated Current/phase: 1.50A, Voltage: 4.20V, Frame Size: 35 x 35mm, Motor Length: 52mm, Shaft
Buy It Now:
£45.14
This model is economy linear stepper motor which named Nema 11 non-captive linear actuator, it was composed of 34mm 1.8 degree 0.75A Nema 11 stepper motor and 150mm length Tr5.56x4.8768 linear screw.
Buy It Now:
£35.67
This Nema 11 stepper motor with 51mm body and 0.67A rated current, integrated a planetary gearbox of 26.85:1 gear ratio.
Buy It Now:
£32.73
This Nema 11 stepper motor with 0.67A rated current, integrated a planetary gearbox of 5.18:1 gear ratio.
Buy It Now:
£33.60
Nema 11 Closed-loop Stepper Gearmotor 11HS20-0674D-PG5-E22-300 300CPR with 5:1 Planetary Gearbox: Motor Type: Bipolar Stepper, Step Angle without Gearbox: 1.8 deg, Holding Torque without Gearbox: 0.12Nm(16.997oz.in), Rated Current/phase: 0.67A, Phase Resi
Buy It Now:
£64.03
Nema 11 Closed-loop Stepper Gearmotor 11HS12-0674D-PG27-E22-300 300CPR with 27:1 Planetary Gearbox
Buy It Now:
£64.03
Nema 11 Closed Loop Stepper Motor 11HS12-0674D-E22-300 0.07Nm Encoder 300CPR
Buy It Now:
£39.12
Brushless DC Motor Driver BLS-510 DC18V~50V
Buy It Now:
£42.66
This stepper driver adopts Leadshine’s pure sinusoidal current control technology. It can be used to drive 2-phase or 4-phase motors (Nema 17 to Nema 42) with lower noise and heat generation.
Buy It Now:
£54.85
400mm Lead Screw Stepper Motor Trapezoidal 2mm Pitch 5mm Diameter: Manufacturer Part Number: Tr5x2-400. Material: Stainless steel. Screw diameter: 5mm. Lead of thread: 2mm. Length: 400mm.
Buy It Now:
£13.39
4 x Stepper Motor Driver 2.4-7.2A Max 80VAC or 110VDC MA860H + 4 x 13Nm (1841oz.in) of Nema 34 Stepper Motor + 4 x 350W 60V 5.9A 115/230V Switching Power Supply
Buy It Now:
£588.61
3 x Stepper Motor Driver 2.4-7.2A Max 80VAC or 110VDC MA860H + 3 x 8.5Nm (1204oz.in) of Nema 34 Stepper Motor + 3 x 350W 60V 5.9A 115/230V Switching Power Supply
Buy It Now:
£401.85
