Nema 11 Pancake Stepper Motor 11HS04-0504S 1.8deg 1Ncm 0.5A 28x28x9.5mm 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2025
Nema 11 Pancake Stepper Motor 11HS04-0504S 1.8deg 1Ncm 0.5A 28x28x9.5mm 4 Wires
This bipolar pancake Nema 11 stepper motor with step angle 1.8deg and size 28x28x9.5 mm. It has 4 wires, each phase draws 0.5 A, with holding torque 10 Ncm (14.164 oz.in).
Electrical Specification
-
Manufacturer Part Number: 11HS04-0504S
-
Motor Type: Bipolar Stepper
-
Step Angle: 1.8 deg
-
Holding Torque: 1Ncm (1.4164oz.in)
-
Rated Current/phase: 0.5 A
-
Phase Resistance: 4 ohms
-
Inductance: 0.8 mH ± 20%(1KHz)
Physical Specification
-
Frame Size: 28 x 28 mm
-
Body Length: 9.5 mm
-
Shaft Diameter: Φ4 mm
-
Shaft Length: 10 mm
-
Number of Leads: 4
-
Lead Length: 300 mm
-
Weight: 28 g
Connection
|
A+ |
A- |
B+ |
B- |
|
Red |
Blue |
Orange |
Yellow |
| Electrical Specification | |
|---|---|
| Bipolar/Unipolar | Bipolar |
| Holding Torque (Ncm) | 1 |
| Holding Torque (oz.in) | 1.416 |
| Inductance(mH) | 0.8 |
| Phase Resistance(ohm) | 4 |
| Rated Current (A) | 0.5 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 9.5 |
| Frame Size(mm) | 28 x 28 |
| Lead Length(mm) | 300 |
| No. of Lead | 4 |
| Shaft Length(mm) | 10 |
| Shaft Type | O |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Diameter(mm) | 4 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.


クレジットカード決済
PayPal