Nema 18 Round Pancake Stepper Motor 18HR06-1004S 1.8deg 9Ncm 1A Φ46x16mm 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2025
Nema 18 Round Pancake Stepper Motor 18HR06-1004S 1.8deg 9Ncm 1A Φ46x16mm 4 Wires
This bipolar pancake Nema 18 stepper motor with step angle 1.8deg and size Φ46x16 mm. It has 4 wires, each phase draws 1 A, with holding torque 9 Ncm (12.748 oz.in).
Electrical Specification
- Manufacturer Part Number: 18HR06-1004S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 9 Ncm(12.748 oz.in)
- Rated Current/phase: 1 A
- Phase Resistance: 2.8 ohms
- Inductance: 2.4 mH ± 20%(1KHz)
Physical Specification
- Frame Size: Φ46 mm
- Body Length: 16 mm
- Shaft Diameter: Φ4 mm
- Shaft Length: 10 mm
- Number of Leads: 4
- Lead Length: 300 mm
- Weight: 103 g
Connection
|
A+
|
A-
|
B+
|
B-
|
|
Red
|
Blue
|
Orange
|
Yellow
|
| Electrical Specification | |
|---|---|
| Bipolar/Unipolar | Bipolar |
| Holding Torque (Ncm) | 9 |
| Holding Torque (oz.in) | 12.748 |
| Inductance(mH) | 2.4 |
| Phase Resistance(ohm) | 2.8 |
| Rated Current (A) | 1 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 16 |
| Frame Size(mm) | Φ46 |
| Lead Length(mm) | 300 |
| No. of Lead | 4 |
| Shaft Diameter(mm) | 4 |
| Shaft Length(mm) | 10 |
| Shaft Type | O |
| Single Shaft/Dual Shaft | Single Shaft |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.


クレジットカード決済
PayPal