Nema 42 CNC Stepper Motor 42HS46-6004S 12 Nm 6.0A 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th, 2026
Nema 42 CNC Stepper Motor 42HS46-6004S 12 Nm 6.0A 4 Wires
Electrical Specification
- Manufacturer Part Number: 42HS46-6004S
- Number of Phase: 2
- Step Angle: 1.8 deg
- Holding Torque: 12 Nm(1699.68oz.in)
- Rated Current/phase: 6 A
- Phase Resistance: 0.5 ohms± 10%
- Inductance: 8.4 mH ± 20%(1KHz)
Physical Specification
- Frame Size: 110 x 110 mm
- Body Length: 116 mm
- Shaft Diameter: Φ19 mm
- Shaft Length: 40 mm
- keyway Shaft Length: 25 mm
- Number of Leads: 4
- Lead Length: 500 mm
- Weight: 6.6 kg
Connection
|
A+
|
A-
|
B+
|
B-
|
|
RED
|
GRN
|
YEL
|
BLU
|






| Electrical Specification | |
|---|---|
| Holding Torque (Ncm) | 1200 |
| Holding Torque (oz.in) | 1699.68 |
| Inductance(mH) | 8.4 |
| Phase Resistance(ohm) | 0.5 |
| Rated Current (A) | 6 |
| Motor Specification | |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 116 |
| Frame Size(mm) | 110 x 110 |
| Lead Length(mm) | 500 |
| No. of Lead | 4 |
| Shaft Diameter(mm) | 19 |
| Shaft Length(mm) | 40 |
| Weight(g) | 6600 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.


クレジットカード決済
PayPal