Motors & Drivers
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 64:1 gear ratio.
Buy It Now:
£44.49
This Nema 17 stepper motor with 60mm body and 2.1A rated current, integrated a planetary gearbox of 5.18:1 gear ratio.
Buy It Now:
£30.52
This Nema 11 stepper motor with 51mm body and 0.67A rated current, integrated a planetary gearbox of 13.73:1 gear ratio.
Buy It Now:
£32.73
This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A at 6.0V, with holding torque 4Ncm (5.7oz.in).
Buy It Now:
£18.21
This Nema 17 stepper motor with 48mm body and 1.68A rated current, integrated a planetary gearbox of 99.05:1 gear ratio.
Buy It Now:
£29.25
This Nema 17 stepper motor with 38mm body and 1.68A rated current, integrated a planetary gearbox of 5.18:1 gear ratio.
Buy It Now:
£26.71
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x45mm. It has 4 wires, each phase draws 0.67A at 4.6V, with holding torque 9.5Ncm (13.5oz.in).
Buy It Now:
£13.20
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 1.68A, with holding torque 45Ncm (64oz.in). It's very good choice for 3D printer.
Buy It Now:
£11.87
Buy It Now:
£69.00
Buy It Now:
£63.99
Buy It Now:
£71.99
Nema 23 Integrated Stepper Motor 126Ncm with Driver ISC04 12-38VDC: Manufacturer Part Number: ISC04-10, Step Angle: 1.8 deg, Holding Torque: 126 Ncm(178.4oz.in), Rated Current/phase: 2.8A, Frame Size: 57 x 57 mm, Body Length: 75mm, Shaft Diameter: Φ6.35mm
Buy It Now:
£79.36
Nema 23 Integrated Closed Loop Stepper Motor ESS23-20 2.2Nm 24-50VDC 1000CPR: Holding Torque: 2.2Nm(311.60oz.in), Input Voltage: 24 - 50VDC, Output Peak Current: 1.8 - 4.0A, Logic Input Current:10mA, Logic Input Voltage:5V, Frame Size: 57 x 57mm, Body Len
Buy It Now:
£101.59
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.
Buy It Now:
£16.49
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.68A, with holding torque 36Ncm (51oz.in).
Buy It Now:
£10.40
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 10:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Buy It Now:
£42.86