Motors & Drivers
Nema 14 (Φ36x17.5mm) Round Stepper Motor 14HR07-1004VRN 1.8deg 9 Ncm 1.0A 4 Wires: Motor Type: Bipolar Stepper, Step Angle: 1.8 deg, Holding Torque: 9 Ncm(12.75 oz.in), Frame Size: 36.5 x 36.5 mm, Body Length: 17.5 mm, Shaft Diameter: Φ2.5 mm, Shaft Lengt
Buy It Now:
£15.19
This Nema 23 stepper motor with 55mm body and 2.8A rated current, integrated with a 61.65mm Planetary gearbox of 15:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Buy It Now:
£79.80
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x114mm. It has 4 wires, each phase draws 3.5A, with holding torque 3.0Nm (425oz.in).
Buy It Now:
£31.34
This VFD with power 7.5HP(5.5KW) and three phase 220V input voltage. The H100 series is General Variable Frequency Drive(VFD)
Buy It Now:
£174.54
This VFD with power 5HP(3.7Kw) and single/three phase 220V input voltage. The H100 series is General Variable Frequency Drive(VFD)
Buy It Now:
£197.60
This bipolar Nema 23 stepper motor with step angle 0.9deg and size 57x57x56mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.26Nm (178.4oz.in).
Buy It Now:
£19.63
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used for brakes, encoder and hand wheels.
Buy It Now:
£23.38
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x26mm. It has 4 wires, each phase draws 0.4A at 12V, with holding torque 14Ncm (20oz.in).
Buy It Now:
£10.01
This Nema 17 stepper motor with 38mm body and 1.68A rated current, integrated a planetary gearbox of 5.18:1 gear ratio.
Buy It Now:
£26.71
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x20mm. It has 4 wires, each phase draws 0.4A, with holding torque 5Ncm (7.08oz.in).
Buy It Now:
£10.01
This model is economy linear stepper motor which named Nema 23 external linear actuator, the motor part is 56mm 1.8 degree 3A Nema 23 stepper motor. It was integrated with 150mm Tr8x8 threaded rod, and a Brass screw nut move along the threaded rod.
Buy It Now:
£40.82
This dual shaft nema 8 stepper motors with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A at 6.0V, with holding torque 4Ncm (5.7oz.in). A rear shaft is available.
Buy It Now:
£18.81
Nema 34 Stepper Motor 34HP29-6004S 1.8deg 4.5Nm 6.0A 4 Wires: Number Of Phase: 2, Step Angle: 1.8 deg, Holding Torque: 4.5 Nm(637.38oz.in), Rated Current/phase: 6.0A, Frame Size: 86 x 86mm, Body Length: 74 mm, Shaft Diameter: Φ14mm, Shaft Length: 37mm
Buy It Now:
£43.29
This Nema 23 stepper motor with 55mm body and 2.8A rated current, integrated with a 61.65mm Planetary gearbox of 50:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Buy It Now:
£79.80
Dual Shaft Nema 14 Gear Stepper Motor 14HS11-1004D-PG19-AR3 with 19:1 Planetary Gearbox, Step Angle: 1.8 deg, Holding Torque without Gearbox: 0.125 Ncm(17.7 oz.in), Rated Current/phase: 1.0 A, Phase Resistance: 3.5 ohms, Inductance: 3.5 mH ± 20%(1KHz)
Buy It Now:
£32.04
The motor part is 66mm body 1.8 degree 2.5A Nema 23 stepper motor, and it has integrated with a 9.53mm (0.3752") diameter 250mm (9.8425") length lead screw and a POM screw nut, the linear travel is 10.16mm (0.4") per revolution.
Buy It Now:
£126.46