Motors & Drivers
AR3 Open Source Robot Stepper Motors Package Kit, This kit only has motors in AR3 as the below.
Buy It Now:
£305.26
Difference between AR3 and AR2 is that each motor in AR3 have rear shaft and mounting holes for encoder.
Buy It Now:
£504.66
AR2 Open Source Robot Package Kit with Stepper Motor, Driver, Power Supply and Bracket
Buy It Now:
£477.17
Variable Frequency Drive (VFD) V70-7.5T4 Spindle Motor Inverter 7.5KW 10HP 17.5A 380V: Input Voltage: 380 V (Three-phase), Capacity of driver: 14 KVA, Applicable motor: 7.5KW, Control mode: V/F, Vector control, Communication control: RS-485
Buy It Now:
£232.15
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.
Buy It Now:
£86.43
DMRS Series are stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applicat
Buy It Now:
£68.18
CLRS Series are closed loop stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the ope
Buy It Now:
£119.28
CLRS Series are closed loop stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the ope
Buy It Now:
£85.22
The CL42T can power 2-phase NEMA11, 14 and 17 stepper motors with incremental encoders(Encoder resolution must be 1000-line). Compared with traditional open loop stepper systems, a CL42T adopted closed loop step system can eliminate potential loss of step
Buy It Now:
£51.16
This mini nema 11 bipolar stepper motor with step angle 1.8deg and size 28x28x31mm. It has 4 wires, each phase draws 0.67A at 3.8V, with holding torque 6Ncm (8.5oz.in).
Buy It Now:
£12.37
Nema 23 Integrated Stepper Motor 190Ncm with Driver ISC04 12-38VDC: Step Angle: 1.8 deg, Holding Torque: 190 Ncm(269oz.in), Rated Current/phase: 2.8A, Frame Size: 57 x 57mm, Body Length: 96mm, Shaft Diameter: Φ6.35mm, Shaft Length: 21mm
Buy It Now:
£86.75
Nema 11 Dual Shaft Geared Stepper Motor with 14:1 Planetary Gearbox (9.5mm Rear Shaft Length): Motor Type: Bipolar Stepper, Step Angle: 1.8 deg, Holding Torque without Gearbox: 0.14 Ncm(19.88 oz.in), Rated Current/phase: 0.67 A, Phase Resistance: 12 ohms.
Buy It Now:
£34.31
This document describes the basic functionality and the electrical specifications of Skysmotor's 5 Axis CNC Breakout Board Interface ST-V2.
Buy It Now:
£10.36
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 0.4A at 12V, with holding torque 26Ncm (36.8oz.in).
Buy It Now:
£38.38
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 0.4A at 12V, with holding torque 26Ncm (36.8oz.in).
Buy It Now:
£9.64
Φ35x35.2mm PM Stepper Motor 35PM48M03-SG120 120:1 Spur Gearbox:Motor Type: PM Stepper, Phase: 4, Step Angle: 0.0625 deg, Rated Current/phase: 0.4 A, Holding Torque: 98 Ncm(138.807 oz.in)
Buy It Now:
£13.92