Motors & Drivers
This is the strongest Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x114mm. It has 4 wires, each phase draws 4.2A, with holding torque 3.0Nm (425oz.in).
Buy It Now:
£31.34
This Nema 17 stepper motor with 33mm body and 0.4A rated current, integrated a planetary gearbox of 5.18:1 gear ratio.
Buy It Now:
£26.08
This Nema 17 stepper motor with 48mm body and 1.68A rated current, integrated a planetary gearbox of 13.73:1 gear ratio.
Buy It Now:
£27.98
Buy It Now:
£65.38
Nema 17 Stepper Motor 17HS15-1504S 42Ncm 4 Wires with 1m Cable & Connector：Motor Type: Bipolar Stepper, Step Angle: 1.8 deg, Holding Torque: 42Ncm(59.49oz.in), Rated Current/phase: 1.50A, Frame Size: 42 x 42mm, Body Length: 39mm, Shaft Diameter: Φ5mm, D-c
Buy It Now:
£7.28
Buy It Now:
£662.79
Buy It Now:
£107.55
Buy It Now:
£97.90
Closed-Loop Stepper Driver HBS86H 20~80VAC/30-110VDC for NEMA 34 Stepper Motor
Buy It Now:
£37.08
Buy It Now:
£66.01
Nema 23 Planetary Geared Stepper Motor DLF+HBT5776C with 4:1/5:1/10:1/20:1/25:1/40:1/50:1/100:1 Planetary Gearbox
Buy It Now:
£98.46
Nema 23 Planetary Geared Stepper Motor DLF+57HS5630A4D with 4:1/5:1/10:1/20:1/25:1/40:1/50:1/100:1 Planetary Gearbox
Buy It Now:
£73.76
Closed-Loop System: Nema 23 closed-loop stepper motors with 1000-line encoders. Motor Torque: 1.2Nm, 2Nm, 3Nm is available. DSP Drivers: HB8080C drivers with a peak current of 13A and a response frequency of 200KHz for responsive control. Supports 24-80VD
Buy It Now:
£60.81
Nema 23 Stepper Motor 57HS5630A4 1.8 Deg 1.2Nm 4-Lead 3A 2 Phase for 3D printer CNC Router
Buy It Now:
£18.54
The TB6600 Motor Driver is a 2-phase stepper motor driver designed for stable performance and durability. It supports a wide voltage range from 9V to 40V DC and can output current from 0.5A to 4A, making it suitable for 4-wire and 6-wire stepper motors. I
Buy It Now:
£8.08